Aztek AWD V6-3.4L VIN E (2004)
Parking Brake Warning Switch: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the left-side instrument panel insulator.
2. Remove the left-side door sill plate.
3. Remove the park brake indicator switch electrical connector.
4. Remove the park brake indicator switch screw.
5. Remove the parking brake indicator switch.
Installation Procedure
1. Install the park brake indicator switch.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the park brake indicator switch screw.
Tighten the park brake indicator switch screw to 3 Nm (27 inch lbs.).
3.Install the park brake indicator switch electrical connector.
4. Install the left-side door sill plate.
5. Install the left-side instrument panel insulator.