Aztek AWD V6-3.4L VIN E (2004)
Water Pump: Service and Repair
Water Pump Replacement (LA1)
Removal Procedure
1. Drain the cooling system until the coolant is below the level of the water pump.
2. Remove the drive belt guard.
3. Loosen the water pump pulley bolts.
4. Remove the drive belt.
5. Remove the water pump pulley bolts.
6. Remove the water pump pulley.
7. Remove the water pump bolts.
8. Remove the water pump.
9. Remove the water pump gasket.
10. Clean the water pump mating surfaces.
Installation Procedure