Aztek AWD V6-3.4L VIN E (2004)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement
Coolant Heater Cord Replacement (LA1)
Removal Procedure
Important: The strap that secures the coolant heater cord to the diagonal brace is reusable. Do NOT cut this strap in order to remove it.
1. Press the coolant heater strap retainer tab in order to remove coolant heater cord strap.
2. Use wire cutters in order to remove the remaining coolant heater cord straps from the engine wiring harness.
3. Raise and support the vehicle.
4. Use wire cutters in order to remove the 3 coolant heater cord lower straps (1) from the engine wiring harness.
5. Remove the right front wheel.
6. Remove the right engine splash shield.
7. Remove the engine coolant heater cord from the engine coolant heater.
8. Remove the engine coolant heater cord.
Installation Procedure
