Aztek AWD V6-3.4L VIN E (2004)
8. Install a J 28467-B and retention pin to each end of the J 28467-500 beam (2).
9. Position the J 28467-B to the left and right side inner fender rails in order to install the J 28467-500.
10. Assemble the following to create 2 lift hook assemblies as shown:
^
J 28467-34
^
J 28467-6A
^
J 28467-7A
11. Install the 2 lift hook assemblies (1) to the J 45057-2 (2).
