Aztek AWD V6-3.4L VIN E (2004)
Heater Core: Service and Repair
Heater Case/Cover Replacement
HEATER CORE COVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the right I/P insulator.
2. Remove the left I/P insulator.
3. Remove the I/P compartment.
4. Remove the center floor air outlet.
5. Remove the screws retaining the heater outlet duct.
6. Remove the heater outlet duct.
7. Disconnect the I/P harness to heater core cover tie strap.
8. Remove the screws retaining the heater core cover.
9. Remove the heater core cover.
INSTALLATION PROCEDURE