Aztek AWD V6-3.4L VIN E (2004)
10. Connect the engine harness electrical connector above the A/C compressor.
11. Connect the A/C compressor electrical connector.
12. Install a new sealing washer at the suction hose to evaporator outlet tube fitting.
13. Remove the cap or tape from the evaporator outlet tube.
14. Connect the suction hose to the evaporator outlet tube fitting.
15. Install the suction hose to evaporator outlet tube bolt.
Tighten
Tighten the bolt to 16 N.m (12 lb ft).
16. Install the air baffle.