Aztek AWD V6-3.4L VIN E (2004)
11. Remove the evaporator outlet tube to TXV nut.
12. Disconnect the evaporator outlet tube from the TXV.
13. Disconnect the evaporator inlet tube from the evaporator outlet tube.
IMPORTANT: Cap or tape the A/C refrigerant components immediately to prevent system contamination.
14. Cap or tape off the TXV.
15. Remove the evaporator inlet tube to condenser fitting bolt.
16. Disconnect the evaporator inlet tube from the condenser.
17. Cap or tape off the condenser.
18. Remove the evaporator outlet tube bracket bolt.
IMPORTANT: Gently lift up on the evaporator outlet tube bracket to allow enough clearance to slide the evaporator inlet tube underneath.
