Aztek AWD V6-3.4L VIN E (2004)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Metal Collar)
QUICK CONNECT FITTING(S) SERVICE (METAL COLLAR)
TOOLS REQUIRED
J 37088-A Fuel Line Disconnect Tool Set
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the retainer from the quick-connect fitting.
CAUTION: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from the J 37088-A tool set for the size of the fitting. Insert the tool into the female connector and push inward in order to
release the locking tabs.