Aztek AWD V6-3.4L VIN E (2004)
1. Install the rear seat belt buckle to the right and/or left rear seat belt anchor stud.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nut to the right and/or left rear bucket seat belt buckle anchor stud.
Tighten
Tighten the right and/or left rear seat belt buckle anchor nut to 42 N.m (31 lb ft).
3. Install the nut cover cup to the right and/or left rear bucket seat belt buckle anchor stud turning clockwise until fully seated.
4. Install the right and/or left rear bucket seat to the vehicle.