Aztek AWD V6-3.4L VIN E (2004)
Suspension Mode Switch: Service and Repair
Automatic Level Control Inflator Air Switch Replacement
Removal Procedure
1. Remove the inflator fill valve access cover.
2. Remove the lower rear quarter trim panel.
3. Remove the switch from the inflator control panel.
4. Disconnect the electrical connector (1) from the accessory inflator switch (2).
Installation Procedure
1. Connect the electrical connector (1) to the accessory inflator switch (2).
2. Install the inflator switch in the inflator control panel.
3. Install the lower rear quarter trim panel.
4. Install the inflator fill valve access cover.