Aztek AWD V6-3.4L VIN E (2004)
16. Inspect the washers on the bolts when service requires the removal of the bottom oil pan.
17. Install a new bolt and washer assembly if the washer is inverted.
18. Inspect the oil pan (24) for the following conditions:
^
A damaged sealing surface
^
A dented or cracked bottom surface
19. Inspect the oil pan gasket (25) for the following conditions:
^
A bent or damaged seal core
^
A damaged rubber seal surface
^
A damaged gasket
20. Inspect the oil pan magnet (26) for the following conditions:
^
Damage
^
Misalignment
21. Clean the oil pan, the gasket and the magnet in order to remove any sediment.
22. Notice: Ensure the oil pan and the case flanges are dry and are free of any oil film or leakage may result.
Use solvent to clean the case.
23. Air dry the case.
24. Use solvent to clean the oil pan gasket surfaces.
25. Air dry the oil pan gasket surfaces.
26. Ensure all traces of the old gasket material are removed.
Installation Procedure