Bonneville V6-3800 3.8L (1991)
Control Module HVAC: Service and Repair
Programmer
Programmer Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. RH sound insulator.
3. Instrument Panel (I/P) compartment (glove box).
4. Screw securing shield, and shield.
5. Temperature valve link rod.
6. Electrical and vacuum connectors.
7. Programmer screws and programmer.
ADJUST
-
Before connecting temperature valve link rod during installation, do "Temperature Valve Link Adjustment" procedure. Refer to procedure under
Adjustments. See: Adjustments
INSTALL OR CONNECT
1. Programmer and mounting screws.
2. Electrical and vacuum connectors.
3. Temperature valve link.
4. Shield and securing screw.
5. I/P compartment (glove box).
6. RH sound insulator.