Bonneville V6-3800 3.8L Supercharged (1992)
Impact Sensor: Service and Repair
Dual Sensor
W/Single Air Bag
1.
Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DEACTIVATION.
2.
Remove instrument panel assembly.
3.
Remove air distributor assembly.
4.
Remove push type fastener retaining sensor pigtail to theft deterrent control module bracket.
5.
Disconnect connector position assurance and sensor electrical connector.
6.
Remove sensor mounting bolts.
7.
Remove sensor by rotating rear of sensor to disengage from mounting clip and pulling rearward.
8.
Reverse procedure to install. Refer to SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
9.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM ACTIVATION.
W/Dual Air Bags
With Single Air Bag
1.
Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DEACTIVATION.
2.
Remove instrument panel assembly.
3.
Remove air distributor assembly.
4.
Remove push type fastener retaining sensor pigtail to theft deterrent control module bracket.
5.
Disconnect connector position assurance and sensor electrical connector.
6.
Remove sensor mounting bolts.
7.
Remove sensor by rotating rear of sensor to disengage from mounting clip and pulling rearward.
8.
Reverse procedure to install. Refer to SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
9.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM ACTIVATION.
With Dual Air Bags
1.
Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DEACTIVATION.
2.
Remove instrument panel assembly.
3.
Disconnect connector position assurance and sensor electrical connector.
4.
Remove steering column support bracket brace to pillar panel bolts.
5.
Remove steering column support bracket brace to steering column support bracket bolts.
6.
Remove steering column support bracket brace.
7.
Remove attaching bolts and sensor.
8.
Reverse procedure to install. Refer to SPECIFICATIONS/TIGHTENING SPECIFICATIONS for torque values.
9.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM ACTIVATION.