Bonneville V6-3800 3.8L Supercharged (1992)
SERVICE PROCEDURE:
(Pontiac SSEI and all vehicles equipped with V92 trailer towing)
1.
Raise vehicle to gain access to cooler pipe clips attached to lower tie bar. (See illustration)
2.
Unlatch the right side clip only to release cooler pipes.
3.
Remove clip attaching screw and clip. (Right side clip only).
4.
Attach rubber grommets to cooler pipes in the same location as original clip.
5.
Install metal clip over rubber grommets (See illustration).
6.
Attach clip to tie bar with screw provided in the kit. Torque to 5-7 N-m (4-5 lb.ft.).
7.
Lower vehicle.
8.
Discard remaining unused parts from the kit.
PARTS INFORMATION:
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor operation No.:
T5224
Labor Time:
.3 hr.