Bonneville V8-4.6L VIN Y (2004)
1. Remove the door trim panel.
2. Disconnect the electrical connectors.
3. Remove the door control module fasteners.
4. Remove the door control module.
INSTALLATION PROCEDURE
1. Install the door control module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners.
Tighten
Tighten the fasteners to 7 N.m (62 lb ft).
3. Install the electrical connectors.
4. Install the door trim panel.
Instrument Panel Module Replacement
INSTRUMENT PANEL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left sound insulator.
