Bonneville V8-4.6L VIN Y (2004)
2. Apply tape and mark the location as shown for the Bonneville front fender emblem/nameplate.
3. Heat the mounting surface to approximately 27-41°C (80-105°F) using the J 25070, if necessary.
4. Ensure that the temperature of the emblem/name plate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing of the emblem/name plate.
5. Remove the protective liner from the back of the emblem/name plate.
6. Position the emblem/name plate to the location marks and press the emblem/name plate to the mounting surface.
7. Apply equal pressure along the emblem/name plate to uniformly bond the item to the mounting surface.
8. Remove the protective tape from the mounting surface.