Bonneville V8-4.6L VIN Y (2004)
^
Tighten the water housing crossover bolts to 25 Nm (18 ft. lbs.).
4. Connect the heater hose to the water housing crossover.
5. Connect the cable harness clip to the water housing crossover.
6. Install the 2 bolts (3) attaching the water pump belt tensioner (1) to the water crossover.
^
Tighten the water pump belt tensioner bolts to 10 Nm (89 inch lbs.).
7. Install the water pump.
8. Position the J 38185 to the clamp in order to connect the outlet radiator hose (2) to the thermostat housing.
9. Position the J 38185 (2) to the clamp in order to connect the inlet radiator hose (1) to the water housing crossover.
