Bonneville V8-4.6L VIN Y (2004)
Engine Block Heater: Service and Repair
Coolant Heater Replacement- Right
Coolant Heater Replacement - Right
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the electrical connector at the coolant heater.
3. Remove the coolant heater bolt.
4. Remove the coolant heater.
Installation Procedure
1. Install the coolant heater.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the coolant heater bolt.
^
Tighten the coolant heater bolt to 10 Nm (89 inch lbs.).
3. Connect the electrical connector to the coolant heater.
4. Lower the vehicle.