Bonneville V8-4.6L VIN Y (2004)
Compass: Service and Repair
Electronic Compass Module Replacement
ELECTRONIC COMPASS MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the push-in fasteners (2) retaining the compass module to the rear shelf in the rear compartment.
3. Slide the module (1) from the mounting slot.
4. Disconnect the connector (3).
INSTALLATION PROCEDURE
1. Connect the connector (3) to the module (1).
2. Install the module into the mounting slot.
3. Install the push-in fasteners (2). Press the push-in fasteners until firmly seated.
4. Close the rear compartment lid.