Bonneville V8-4.6L VIN Y (2004)
Fog/Driving Lamp Bulb: Service and Repair
FOG LAMP BULB REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the air deflector if necessary (HX only).
3. Disconnect the electrical connector.
4. Twist the lamp (1) about 1/4 turn counterclockwise in order to remove.
5. Remove the fog lamp bulb (1) from the lamp housing.
INSTALLATION PROCEDURE
1. Install the fog lamp bulb (1) into the lamp housing.
2. Twist the lamp (1) about 1/4 turn clockwise in order to lock the lamp into the housing.
3. Connect the electrical connector.
4. Install the air deflector if necessary (HX only).
5. Lower the vehicle.