Bonneville V8-4.6L VIN Y (2004)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the cover from the underhood fuse block.
3. Disconnect the positive battery cables fastener (1) from the underhood fuse block.
4. Disconnect the wiring harness clip from the accumulator cover and position the cables out of the way.
5. Disconnect the retaining clip securing the evaporator hose to the accumulator cover.
6. Carefully position the evaporator hose out of the way.