Bonneville V8-4.6L VIN Y (2004)
2. Connect the lower transaxle oil cooler pipe to the radiator.
^
Tighten the transaxle oil cooler pipe fitting to 25 Nm (18 ft. lbs.).
3. Push the lower transaxle oil cooler pipe into the transaxle quick connect fitting, until a "click" is heard.
4. Tug gently on the cooler pipe to ensure proper retention.
5. Slide the plastic cap over the quick connect joint.
6. Raise and support the vehicle.
7. Position the upper transaxle oil cooler pipe up into the engine compartment.
8. Install the upper transaxle oil cooler pipe wire retainers to the oil cooler pipe.
9. Push the upper transaxle oil cooler pipe into the transaxle quick connect fitting, until a "click" is heard.
10. Tug gently on the cooler pipe to ensure proper retention.
11. Slide the plastic cap over the quick connect joint.
12. Install the rear exhaust manifold pipe.
13. Lower the vehicle.
14. Push the upper transaxle oil cooler pipe into the radiator quick connect fitting, until a "click" is heard.
