Fiero L4-151 2.5L (1985)
Wheel Cover: Customer Interest
Wheels - Wire Wheel Cover Noise
Number
85-3-2
Date
12/84
Subject:
WIRE WHEEL COVER NOISE 1982-85 MODELS
Wire Wheel Cover Assembly
Some wire wheel covers may have a snapping or creaking noise when driving at low speeds. This noise may be caused by the wheel cover flexing on the
wheel. This condition can be corrected by removing the wheel covers and placing them upside down on a covered bench. Then center punch and drill
four (4) 1/4" holes evenly spaced in the wheel cover. See Illustration. Holes should be drilled on the second step of the cover from the inboard side.
Install the four (4) nylon clips, part number 411700 in the drilled holes.
Warranty Information
Labor Operation
T4080
Labor Time:
One - .3 hr.; Four - .5 hr.
Trouble Code:
40