Fiero L4-151 2.5L (1985)
FIGURE 5 - DIRECT CLUTCH SERVICE PACKAGE
FIGURE 6 - NEW DIRECT CLUTCH SNAP RING POSITION
NOTICE:
Do not use any component parts from the 1985 production forward clutch assembly or direct clutch assembly to service prior model
year clutch assemblies. This includes the 1985 production composition clutch plates for both the forward and direct clutch. Refer to
Figures 1 thru 6 for component identification and refer to the appropriate service parts book.
FIGURE 3 - 985 COMPOSITION CLUTCH PLATE ASSEMBLY
THE 1985 FORWARD AND DIRECT COMPOSITION CLUTCH PLATES ARE APPROXIMATELY 0.254 mm (.010") THINNER THAN
PREVIOUS MODEL YEAR COMPOSITION PLATES. THE 1985 COMPOSITION PLATES ARE IDENTIFIED AS SHOWN ABOVE AND THE
CLUTCH PACK MAY CONTAIN ONE OR BOTH TYPES.