Firebird V6-3.8L VIN K (1995)
Removing Outside Rearview Mirror Assembly (Typical)
REMOVE OR DISCONNECT
1. Bolt/screw(85).
2. Bezel assembly (84).
3. Remote handle from bezel assembly (84), if equipped.
4. Front side door trim assembly, if equipped with electric control mirror assemblies.
5. Electrical connector, if equipped.
^
Pull rosebud clip on electrical connector from mirror assembly (109).
^
Pull apart connection.
6. Nuts (101).
7. Mirror assembly (109).
INSTALL OR CONNECT
1. Mirror assembly (109).
2. Tighten nuts (101) to 6 Nm(53 lb. in.).
3. Electrical connector, if equipped.
^
Connect electrical connector.
^
Push rosebud clip on electrical connector into hole in mirror assembly (109).
4. Front side door trim assembly, if removed.
5. Remote handle to bezel assembly (84), if equipped.
^
Align slot in remote handle to tab on bezel assembly (84).
^
Push remote handle into bezel assembly (84) to engage threads on remote handle onto metal clip in bezel assembly (84).
6. Bezel assembly (84).
^
Align retainers in bezel assembly (84) to holes in applique assembly.
7. Tighten bolt/screw (85) to 4 Nm (35 lb. in.).
Radio Front Side Door (Tweeter) Speaker Assembly