pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Customer Interest: > < Twin Lift-Off Panel - Water Leaks|Page 5764
Page 1
background image

T-Top Weather Strip: All Technical Service Bulletins
T-Top - Water Leaks

Number 84-10-16

Date

5/84

Subject:

LIFT-OFF PANEL SEALINGSTRIP SEALING 1978 THROUGH 1984 FIREBIRD STYLES

A new lift-off panel sealingstrip sealing material was introduced into 1984 Firebird production in March of 1984. This material replaces the double
backed sealing tape previously installed on the sealingstrip. The new material is packaged by Dominion Sure Seal, under part number BTP, in 100 foot
rolls.

If a lift-off panel weatherstrip butt joint water leak is encountered on styles built before March 1984, it may be caused by inadequate sealing of the
sealingstrip to the lift-off panel support. To correct this condition, the following procedure should be followed.

1.

Remove lift-off panel and place on a clean protected surface.

2.

Remove lift-off panel weatherstrip, weatherstrip retainer and sealingstrip, following Service Manual procedure.

3.

Clean the double backed tape from the sealingstrip..

4.

Install Dominion Sure Seal Strip Sealer (BTP) to lift-off glass panel support, as shown in illustration.

5.

Install sealingstrip, weatherstrip retainer and weatherstrip as described in the Service Manual.

To locate the nearest Sure Seal Distributor in your area, please call COLLECT (416) 625-7900.

We believe this source and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse,
indicate any preference for or assume any responsibility for the products or equipment from these firms or for any such items which may be available
from other sources.

Customer Interest: > < Twin Lift-Off Panel - Water Leaks|Page 5764