Firebird V8-305 5.0L (1982)
8.
Clinch upper ears of outboard shoe by positioning pliers with one jaw on top of upper ear and one jaw in notch on bottom shoe opposite ear, Fig.
5. Ears are to be flat against caliper housing with no radial clearance. If clearance exists, repeat clinching procedure. Before moving vehicle,
pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is obtained. On some models with low drag
calipers, apply approximately 175 pounds of pressure to the brake pedal three times to properly seat the caliper and related components.
