pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Alignment - The Importance of Four Wheel Alignment|Page 570 > < Alignment - The Importance of Four Wheel Alignment|Page 568
Page 2
background image

*USE SHIMS ONLY AT LOCATION ON SPRING, AS SPECIFIED ABOVE.

Technical Service Bulletin # 8737

Date: 861201

Tires - Uneven Outer Edge Wear

Number 87-3-7

Date

12/86

Subject:

UNEVEN WEAR-OUTER RIBS ON FRONT TIRES

1982-87 FIREBIRD

Some 1982-87 Firebirds may experience uneven tire wear on the outer ribs of the front tires.

To eliminate or minimize this condition check the sum toe setting on an alignment machine and reset the sum toe to .10 +/- .20 degrees.

The sum toe specification was changed from .3 degrees +/- .20 degrees to .10 +/- .20 for both factory and service settings starting with the VIN
breakpoints below:

PLANT

VIN

Van Nuys

HL207675

Norwood

HN215155

Use applicable Labor Operation Number and Time.

Technical Service Bulletin # 85316

Date: 850501

Suspension - Chassis Spring Shims

Number

85-3-16

Date

5/85

Subject:

CHASSIS SPRING SHIMS

1977 THROUGH 1985 REAR WHEEL DRIVE VEHICLES
Spring shims for minor correction of low trim height are available from GMWDD.  The shims can be used on 1977 through 1985 rear wheel drive
vehicles.

These shims are 1/8" thick, and no more than two (2) are to be used at each spring location. When used on a front spring, the vehicle's trim height at the
wheel opening will be increased approximately two (2) times the thickness of the shim. When used on a rear spring, the trim height will be increased
approximately the same amount as the thickness of the shims.

Part Description

Part Number

Shim,

*Front Spring Upper

25524879

Shim,

*Rear Spring Lower

25524880

*USE SHIMS ONLY AT LOCATION ON SPRING, AS SPECIFIED ABOVE.

Alignment - The Importance of Four Wheel Alignment|Page 570 > < Alignment - The Importance of Four Wheel Alignment|Page 568