Firebird V8-305 5.0L (1982)
Canister Purge Control Valve: All Technical Service Bulletins
EVAP - Canister Control Valve Mounting Procedure
Number 83-T-22
Section 6E Date 04/83
Subject:
REVISED MOUNTING PROCEDURE FOR CANISTER CONTROL VALVES - 1982-1983 FIREBIRD, BONNEVILLE, AN
VALVE MOUNTING
In the event a canister control valve (CCV) requires replacement, a newly designed valve should be installed.. The new valve should be supported using
the following revised mounting procedures (refer to chart below):
ENGINE
MODEL
NEW CCV
VIN
YEAR
ENGINE/MODEL
VALVE MOUNTING
PART NO.
CODE
1982/
5.0L (4-bbl.)/
Suspend Per
17075074
H
1983
Firebird or
Instructions On
Grand Prix* or
Illustration Shown
Bonneville*
On The Reverse Side
1982/
5.0L (4-bbl.)/
Suspend Per
17075074
H
1983
Grand Prix or
Instructions Below
Bonneville
*Equipped With Heavy Duty Charging System
VALVE MOUNTING INSTRUCTIONS
1982-1983 5.0L (4-bbl.) Grand Prix or Bonneville Models
1.
Remove bolt which retains the CCV bracket to alternator brace and discard.
2.
Remove two (2) screws which retain the CCV to bracket. Discard bracket and screws.