Firebird V8-305 5.0L (1982)
Ignition Coil: Testing and Inspection
With Remote Coil
Fig 1 Testing Remote Coil
1. Connect a suitable ohmmeter as shown in Fig. 1 step 1. Using the high scale, read ohmmeter. Should read very high or infinite. If not, replace coil.
2. Connect ohmmeter as shown in Fig. 1, Step 2. Using the low scale, read ohmmeter. Should read very low or zero. If not, replace coil.
3. Connect ohmmeter as shown in Fig. 1, step 3. Using the high scale, read ohmmeter Should not read infinite. If it does, replace coil.
