Firebird V8-305 5.0L (1982)
Firebird
1.
Remove floor console cover.
2.
Disconnect wire connectors from back-up lamp/neutral start switch.
3.
Position gear shift lever into Neutral position.
4.
Remove two screws securing neutral starter switch, then remove switch.
5.
Ensure gear shift lever is in Neutral position before installing switch.
6.
Install new switch in position on gear shift lever. Ensure pin on gear shift lever is in slot of switch. Tighten switch and torque to 14---19 inch lbs.,
Fig. 6.
7.
Move gear shift lever out of Neutral position to break plastic shear pin.
8.
Connect electrical connectors to switch. Apply parking brake and start vehicle. Ensure vehicle starts only in Park or Neutral positions.
9.
Turn ignition off and install floor console cover.
