pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

A/T - Slipping or Loss of Drive Range|Page 3213 > < A/T - 4L60 Slipping or No 3rd/4th Gear|Page 3208
Page 1
background image

Clutch: Customer Interest
A/T - Slipping or Loss of Drive Range

Number 86-7-47

Date

1/87

Subject:

SLIPPING AND/OR LOSS OF DRIVE RANGE

1982-86 MODELS EQUIPPED WITH THM 700-R4 TRANSMISSION

Figure 1 - TRANSMISSION I.D. NAMEPLATE

Slipping or loss of drive range condition on a 1982-86 THM 700-R4 transmission may be caused by latching of the forward clutch sprag assembly. This
condition can result in belling or flaring of the reverse input housing and reaction sun shell. A new sprag, race, and hub assembly is used in production
and is available for service.

Date of Change (Figure 1)

July 17, 1986, Julian date 198, a new sprag, race, and hub assembly was introduced for all 1987 THM 700-R4 transmission models. This change is also
in 1987 Service Replacement Transmission Assembly (SRTA) models effective July 17, 1986, Julian date 198..

A/T - Slipping or Loss of Drive Range|Page 3213 > < A/T - 4L60 Slipping or No 3rd/4th Gear|Page 3208