pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

A/T - Burned 3-4 Clutch/High 2-3 Shifts|Page 3872 > < A/T - New Control Valve Assembly Identification|Page 3867
Page 1
background image

Valve Body: All Technical Service Bulletins
A/T - Burned 3-4 Clutch/High 2-3 Shifts

Number

85-7-3

Date

10/84

Subject:

BURNED 3-4 CLUTCH, AND/OR HIGH 2-3 SHIFTS ALL 1982 THRU 1985 THM 700-R4

"Please discard previous bulletin 84-7-18 due to text change."

FIGURE 7 - INPUT CLUTCH HOUSING

Starting production of all 1985 THM 700-R4 transmissions an air bleed orifice cup plug was added to the input clutch housing (Figure 7). Due to this
change the procedure listed below for air checking the 3-4 clutch piston and the check ball has been revised.
Some 1982 thru 1984 THM 700-R4 transmissions may exhibit a burned 3-4 clutch, and/or high 2-3 shifts.  (The high 2-3 shifts are experienced on C, K,
and G truck gas/diesel applications only).

FIGURE 5 - TRANSMISSION IDENTIFICATION

A/T - Burned 3-4 Clutch/High 2-3 Shifts|Page 3872 > < A/T - New Control Valve Assembly Identification|Page 3867