Firebird V8-305 5.0L (1982)
Shift Linkage: Adjustments
1.
Place selector lever in neutral.
2.
Loosen trunnion nuts on transmission control rod.
3.
Place transmission lever and bracket assembly in neutral and install a gauge pin through hole and slot provided in bracket.
4.
Position lever on transmission in neutral.
5.
Tighten trunnion nuts and remove gauge pin.
6.
Position shift lever in Reverse, set steering column lever in Lock position and lock ignition. Push up on control rod to remove clearance and
tighten nut of adjusting swivel.
