Firebird V8-305 5.0L VIN E TBI (1989)
2. Bolts (41) retaining inner panel cam (40) to the door inner panel.
3. Inner panel cam (40) from window regulator balance arm roller (39).
4. Inner panel cam (40) through access hole.
INSTALL OR CONNECT
1. Inner panel cam (40) to window regulator balance arm roller (39).
2. Inner panel cam (40) to inner door panel.
3. Bolts (41) retaining inner panel cam (40) to the door inner panel. Tighten bolts (41) to 11 Nm (97 lb. in.).
4. Water deflector.
Inside Lock Rod Knob
Lock Rod Knob
REMOVE OR DISCONNECT
1. Inside lock rod knob (20).
2. Slide lock rod knob (20) forward.
3. Insert a small flat-bladed tool behind the end of the lock rod knob (20) and pry it away from the rod.
INSTALL OR CONNECT
1. Inside lock rod knob (20).
2. Insert end of the lock rod knob (20) through the hole in the trim pad switch and remote handle mount panel (5).
3. Slide the lock rod knob (20) rearward until the end of the rod engages the depression in the end of the lock rod knob (20).
Door Trim Panel
Door Trim Panel
REMOVE OR DISCONNECT
Tool Required: J-24595-C Door Trim Pad and Garnish Clip Remover.
1. Remote handle mount panel.
2. Door trim panel (1) using J-24595-C.
^
Push the door trim panel (1) outboard and upward to disengage it from the upper retaining clips.
INSPECT