Firebird V8-305 5.0L VIN F FI (1987)
![background image](/pontiac/firebird/v8-305_5.0l_vin_f_fi/Page-1525003.png)
4.
Remove piston assembly and balance spring.
5.
Remove lock nut, lever, lever seal and anti-friction washer if not removed previously.
6.
Push screw from housing, then remove piston seal and boot.
Fig. 4 Positioning piston in caliper
Fig. 5 Installing piston into caliper
Fig. 6 Driving boot into caliper
ASSEMBLY
1.
Install new piston seal.
2.
Install new boot onto piston assembly with lip of boot located in piston groove.