Firebird V8-350 5.7L VIN P SFI (1996)
13. Pivot pin cap (1), parking brake actuator lever (5), new spray clip (2) and actuator lever return spring (4), in that order. Teeth of spray clip (2)
must face away from parking brake actuator lever (5). Snap pivot pin seal cap over parking brake lever pivot pin (3).
14. Adjuster screw (11) into rear brake caliper (14) until actuating collar (24) is about parallel to piston bore face of rear brake caliper (14).
15. New guide pin boots (16) and guide pins (15). Lubricate two guide pins (15) with grease provided in repair kit. Slide guide pin boots (16) on guide
pins (15). Fill guide pin boots (16) with provided grease. Assemble to mounting plate (17). Make sure guide pin boots (16) fit into grooves of
guide pins (l5) and mounting plate (17).
16. Install caliper. Refer to Rear Caliper Replacement