pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Heated Oxygen Sensor <--> [Oxygen Sensor] > < Diagram Information and Instructions|Page 2842
Page 1
background image

Manifold Pressure/Vacuum Sensor: Service and Repair

MAP Sensor Location

REMOVE OR DISCONNECT

1. Negative battery cable.
2. Electrical connector.
3. Hold down bolts (2).
4. Sensor from intake manifold.

INSTALL OR CONNECT

1. New sensor seal (lightly coated with clean engine oil).
2. Sensor into intake manifold.
3. Hold down bolts.
4. Torque to 6 Nm (50 lb in).
5. Connect electrical connector.
6. Connect negative battery cable.

Heated Oxygen Sensor <--> [Oxygen Sensor] > < Diagram Information and Instructions|Page 2842