Firebird V8-5.7L VIN G (2001)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the crossmember bolts.
*
Tighten the lower crossmember bolts to 125 N.m (92 lb ft).
*
Tighten the upper crossmember bolts to 145 N.m (107 lb ft).
4. Install the harness clips (1) to the crossmember (2).
5. Connect the wheel speed sensor electrical connector (3).
6. Install the harness clip (2) from the crossmember (1).
7. Install the brake pipe clip bolt (1) from the driver side of the crossmember.
Tighten the brake pipe clip bolt (1) to 13 N.m (115 lb in).
