Firebird V8-5.7L VIN G (2001)
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the wheel speed sensor connector.
3. Remove the rear wheel speed sensor jumper harness grommet (1) from the retainer (4).
4. Remove the upper harness connector from the rear body pass-through connector.
Installation Procedure
1. Install the upper harness connector from the rear body pass-through connector.
2. Install the rear wheel speed sensor jumper harness grommet (1) to the retainer (4).
3. Connect the wheel speed sensor connector.
4. Lower the vehicle.
Rear (With Traction Control)
Wheel Speed Sensor Jumper Harness Replacement - Rear (With Traction Control)
Removal Procedure