Firebird V8-5.7L VIN G (2001)
1. Place the cruise control module onto the bracket.
NOTE Refer to Fastener Notice in Service Precautions.
2. Install the cruise control module bolts.
Tighten
Tighten the cruise control module bolts to 5 N.m (44 lb in).
3. Inspect the cable end to insure that the O-ring is in place.
4. Pull the throttle body end of the cable until cable is taut, continue to hold while performing the following:
4.1. Hook the cable bead (1) to the module ribbon (3).
4.2. Rotate the cable end if necessary, to straighten the ribbon.
4.3. Push the cable fitting end over the ribbon.
4.4. Snap the cable end into the module.
4.5. Ensure that the conduit tangs are engaged.