G5 L4-2.2L (2007)
1. Synchronize the sunroof motor/actuator (1). Refer to Sunroof Motor Synchronization.
2. Install the sunroof motor/actuator (1) to the sunroof module.
3. NOTE: Refer to Fastener Notice.
Install the sunroof motor/actuator bolts (2).
Tighten the bolts to 5 N.m (44 lb in).
4. Connect the electrical connector to the sunroof motor/actuator.
5. Secure the electrical harness to the sunroof module.
6. Verify the sunroof operation.
7. Install the headliner.
8. Refer to Control Module References. See: Testing and Inspection/Programming and Relearning