G5 L4-2.2L (2007)
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the engine harness electrical connector to the MAF/IAT sensor.
1. Install the MAF/IAT sensor.
Notice: Refer to Fastener Notice.
2. Install the MAF/IAT sensor screws.
Tighten the screws to 0.6 N.m (5 lb in).
3. Connect the engine harness electrical connector to the MAF/IAT sensor.