G6 L4-2.4L (2007)
7. Install the rear retainers for the seat cushion cover onto the seat frame.
8. Install the seat belt buckle to the seat.
9. Install the front seat.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
10. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.
Rear Split Folding Seat Back Bolster Replacement
Rear Split Folding Seat Back Bolster Replacement
Removal Procedure
1. Fold the rear seat back to the down position.
2. Remove the clip that retains the seat back bolster to the seat from the back of the seat by squeezing the clip together using needle nose pliers and
pulling out to remove.