G6 L4-2.4L (2007)
Brake Proportioning/Combination Valve: Service and Repair
Proportioning Valve Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .
Important: Use tape to label and mark the locations of the brake pipes in order to aid in installation.
1. Disconnect the 2 brake pipes (1) from the proportioning valve. Use bleeder valve caps or similar caps to plug the ends of the brake pipes in order
to prevent brake fluid from draining out of the pipes and to avoid brake fluid contamination.
2. Disconnect the 4 brake pipes (1) from the proportioning valve. Use bleeder valve caps or similar caps to plug the ends of the brake pipes in order
to prevent brake fluid from draining out of the pipes and to avoid brake fluid contamination.