G6 L4-2.4L (2007)
Notice: Refer to Fastener Notice.
2. Install the HVAC module assembly mounting bolts.
Tighten the bolts to 5 N.m (44 lb in).
3. Install the left hand side window defogger outlet duct.
4. Install the blower motor resistor wire harness connector.
5. Install the blower motor wire harness connector.
6. Install the mode actuator wire harness connector.
7. Install the air temperature actuator wire harness connector.
8. Install the recirculation actuator wire harness connector.
9. Install the I/P assembly.
10. Install the heater hoses to the heater core.
11. Install the A/C lines to the thermal expansion valve.
