G6 L4-2.4L (2007)
![background image](/pontiac/g6/l4-2.4l/Page-1965004.png)
1. With the junction block turned upside down, install the junction block harness connectors into the junction block.
2. Install the locking pin to the power supply connector.
3. NOTE: Refer to Fastener Notice.
Install the bolts retaining the engine, instrument panel (I/P), and forward lamp wiring harness connectors to the junction block.
Tighten the electrical center junction block bolts to 7 N.m (62 lb in).