G6 L4-2.4L VIN B (2006)
Cross-Member: Service and Repair
Support Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the rear wheels.
3. Remove the muffler.
4. Remove the lower control arms.
5. Important: When replacing complete module assembly, mark fastener location of axle bracket (LH/RH) to body rail.
Remove the upper control arm to support assembly bolts and nuts.
6. Remove the toe links.
7. Remove the stabilizer shaft to knuckle bolts.
8. Disconnect the vehicle wiring harness from the clips on the support assembly.
9. Using a suitable jack stand, support the support assembly.