G6 L4-2.4L VIN B (2006)
12. Remove the screws (1) from the pump (2) and manifold (3).
IMPORTANT: Rotate the pump motor outward to remove the bolts from the hydraulic line manifold.
13. Disengage the cylinder hoses (1) by pulling straight rearward on the manifold block and hoses (2). Use a clean shop towel to control any hydraulic
fluid leakage.
14. Lift the pump upward to disconnect the electrical connector from the hydraulic pump motor.
15. Lift the pump up and out of the storage compartment and set the pump on the a protective cover. Use a clean covered surface to control any
hydraulic fluid leakage.
16. Remove the reservoir filler plug (1).Empty the hydraulic fluid in to a suitable container, when replacing the pump motor.