G6 L4-2.4L VIN B (2006)
1. Install and position the drive belt around all of the pulleys except for the drive belt tensioner.
2. Install the J 44811 to the drive belt tensioner.
3. Using the J 44811 , rotate the tensioner counterclockwise.
4. Position the drive belt under the tensioner pulley.
5. Using the J 44811 , rotate the tensioner clockwise in order to seat the tensioner pulley onto the drive belt.
6. Install the right front fender liner. Refer to Front Fender Liner Replacement See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service
and Repair.
7. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement See: Diagrams/Connector Views/Engine Control
Module/Engine Control Module (ECM) C3.